UserShare.net - Highest Paying network around $65/1000 downloads (Official)

Status
Not open for further replies.
i think it is filesonic.... , i'm a premimum member with filesonic
just download a file with the incredible speed of 56KB/sec ... at filesonic

Normal i get 3MB/sec
 
Ping works ok. Is there something with the port? Is it 21?

Same thing from my local connection at home (half around the world away):

STATUS:> [2/7/2011 12:00:53 AM] Getting listing ""...
STATUS:> [2/7/2011 12:00:53 AM] Resolving host name ftp.usershare.net...
STATUS:> [2/7/2011 12:00:53 AM] Host name ftp.usershare.net resolved: ip = 173.199.123.230.
STATUS:> [2/7/2011 12:00:53 AM] Connecting to FTP server... ftp.usershare.net:21 (ip = 173.199.123.230)...
ERROR:> [2/7/2011 12:01:14 AM] The connection failed due to an error or timeout.


Pinging ftp.usershare.net [173.199.123.230] with 32 bytes of data:

Reply from 173.199.123.230: bytes=32 time=15ms TTL=53
Reply from 173.199.123.230: bytes=32 time=24ms TTL=53
Reply from 173.199.123.230: bytes=32 time=15ms TTL=53
Reply from 173.199.123.230: bytes=32 time=14ms TTL=53

Not sure why you get that.It works fine:)
 
Last edited:
Ping works ok. Is there something with the port? Is it 21?

Same thing from my local connection at home (half around the world away):

It works....did you activate FTP in your account?

Status: Connecting to 173.199.123.230:21...
Status: Connection established, waiting for welcome message...
Response: 220 ProFTPD 1.3.3c Server (ProFTPD Default Installation) [173.199.123.230]
Command: USER ***
Response: 331 Password required for ***
Command: PASS ********
Response: 230 User *** logged in
Command: SYST
Response: 215 UNIX Type: L8
Command: FEAT
Response: 211-Features:
Response: MDTM
Response: MFMT
Response: TVFS
Response: MFF modify;UNIX.group;UNIX.mode;
Response: MLST modify*;perm*;size*;type*;unique*;UNIX.group*;UNIX.mode*;UNIX.owner*;
Response: REST STREAM
Response: SIZE
Response: 211 End
Status: Connected
Status: Retrieving directory listing...
Command: PWD
Response: 257 "/" is the current directory
Command: TYPE I
Response: 200 Type set to I
Command: PASV
Response: 227 Entering Passive Mode (173,199,123,230,200,46).
Command: MLSD
Response: 150 Opening ASCII mode data connection for MLSD
Response: 226 Transfer complete
Status: Directory listing successful
 
I have an acct with usershare and I recently got 65 downloads on a 550mb file. I know the site I posted this on is 98% American/Canadian. So I would assume that I would make the 50$ per 1000 downloads from this file, which would make the payout for it around $3.20, but it only showed that I made .98 cents on the date. The report is showing an "average per file download" and seems that is what pay is based on.

Is pay based on average per file downloads, or just the number of downloads a file gets based on it's size? If it is the latter, why isn't my balance reflective of this?
 
Where did you get the number of downloads from? From the files page?

Is so, get ready to be disappointed .... these are download page views not downloads.
 
Consider yourself lucky ..

Yes, I did enable FTP on my account page.


It works....did you activate FTP in your account?

Status: Connecting to 173.199.123.230:21...
Status: Connection established, waiting for welcome message...
Response: 220 ProFTPD 1.3.3c Server (ProFTPD Default Installation) [173.199.123.230]
Command: USER ***
Response: 331 Password required for ***
Command: PASS ********
Response: 230 User *** logged in
Command: SYST
Response: 215 UNIX Type: L8
Command: FEAT
Response: 211-Features:
Response: MDTM
Response: MFMT
Response: TVFS
Response: MFF modify;UNIX.group;UNIX.mode;
Response: MLST modify*;perm*;size*;type*;unique*;UNIX.group*;UNIX.mode*;UNIX.owner*;
Response: REST STREAM
Response: SIZE
Response: 211 End
Status: Connected
Status: Retrieving directory listing...
Command: PWD
Response: 257 "/" is the current directory
Command: TYPE I
Response: 200 Type set to I
Command: PASV
Response: 227 Entering Passive Mode (173,199,123,230,200,46).
Command: MLSD
Response: 150 Opening ASCII mode data connection for MLSD
Response: 226 Transfer complete
Status: Directory listing successful
 
Where did you get the number of downloads from? From the files page?

Is so, get ready to be disappointed .... these are download page views not downloads.

Yes

I thought the views/downloads met the number of downloads or either views (streaming) of a file. What's the point of even showing the number of people that visited the page?
 
Yes

I thought the views/downloads met the number of downloads or either views (streaming) of a file. What's the point of even showing the number of people that visited the page?

VIEWS are important to some people, not only people who want to make money upload to usershare.To you it makes no sense B-)
 
Hello usershare, I'm an active uploader and looking forward to work with you.

Can I have a premium ? my username is Rocke
 
mmmm.... I tried uploading from RL server but the screen says initializing upload and the percentage is stuck at 0% nothing happens...mind you that this RL works with FS,FSC,BS very well. Tried it with another RL same result, one more thing was that both the RL servers ddnt hav usershare plugin. Is that the case?
 
Status
Not open for further replies.
Back
Top