.:Raymond:.
Active Member
Hi,
Here is a little tut I made cause I got bored :P. Enjoy
Step 1 : Add a Regular User
Step 2 : Backup your current sshd_config
Step 3 : Create a new sshd_config file
Step 4 : Paste this into the new file.
The port number should be changed to something else (Example : 2194
Ctrl + x to save it now.
Step 5 : Restart SSHD
*Note* Do not close your current ssh window in case of problems
Now open a new ssh window and try connecting with the port and the user you added. Once you are logged into type su - and it will ask you for root pass. Once you enter it correctly blamo your in
Here is a little tut I made cause I got bored :P. Enjoy
Step 1 : Add a Regular User
Code:
adduser sshadmin && passwd sshadmin
*Note* After entering this command you will be prompted to enter a password.
Step 2 : Backup your current sshd_config
Code:
mv /etc/ssh/sshd_config /etc/ssh/sshd_config.bak
Step 3 : Create a new sshd_config file
Code:
nano -w /etc/ssh/sshd_config
Step 4 : Paste this into the new file.
Code:
## Change to other port is recommended, etc 2488
Port 22
## Sets listening address on server. default=0.0.0.0
#ListenAddress 192.168.0.1
## Enforcing SSH Protocol 2 only
Protocol 2
## Disable direct root login, with no you need to login with admin user, then "su -" you into root
PermitRootLogin no
##
UsePrivilegeSeparation yes
##
AllowTcpForwarding no
## Disables X11Forwarding
X11Forwarding no
## Checks users on their home directority and rhosts, that they arent world-writable
StrictModes yes
## The option IgnoreRhosts specifies whether rhosts or shosts files should not be used in authentication
IgnoreRhosts yes
##
HostbasedAuthentication no
## RhostsAuthentication specifies whether sshd can try to use rhosts based authentication.
RhostsRSAAuthentication no
## Adds a login banner that the user can see
Banner /etc/motd
## Enable / Disable sftp server
#Subsystem sftp /usr/libexec/openssh/sftp-server
## Add users that are allowed to log in
AllowUsers sshadmin
Ctrl + x to save it now.
Step 5 : Restart SSHD
Code:
service sshd restart
*Note* Do not close your current ssh window in case of problems
Now open a new ssh window and try connecting with the port and the user you added. Once you are logged into type su - and it will ask you for root pass. Once you enter it correctly blamo your in
Last edited: